Contact your local GE Bently Nevada representative to order Power Pucks for GE Insight.mesh transmitters. Note that GE transmitters must have a GE External Power Module to enable the connection to Power Puck energy harvesters.
GE Power Pucks are configured for magnetic mounting to flat, metallic surfaces. Additional pipe mounting options are available directly from Perpetua.
| Magnet Install Configuration - Order from GE | Surface Temperature | GE Part Number |
|---|---|---|
| GE Power Puck with Magnetic Mount | <220°F (<105°C) | 102M7936-01 |
| GE External Power Input Battery Module | 185547-02 |
| Pipe Install Configurations - Order from Perpetua | Surface Temperature | Part Number |
|---|---|---|
| GE Power Puck with 2" NPS Pipe Adapter | <220°F (<105°C) | 1000-1000-0200 |
| GE Power Puck with 3" NPS Pipe Adapter | <220°F (<105°C) | 1000-1000-0300 |
| GE Power Puck with 2" NPS Pipe Adapter & 3" Extender | 221-350°F (106-175°C) | 1000-1000-0203 |
| GE Power Puck with 3" NPS Pipe Adapter & 3" Extender | 221-350°F (106-175°C) | 1000-1000-0303 |
| GE Power Puck with 2" NPS Pipe Adapter & 6" Extender | 351-840°F (176-450°C) | 1000-1000-0206 |
| GE Power Puck with 3" NPS Pipe Adapter & 6" Extender | 351-840°F (176-450°C) | 1000-1000-0306 |
| GE Battery Module with External Power Input | 185547-02 |
| Cables | Part Number |
|---|---|
| 6-meter power cable | Included | 10-meter power cable | 00329-01 |
| 20-meter power cable | 00330-01 |